M4 X 16MM TO THE SURFACE WELD SCREW - 3 PROJS
Item No. GWZ 04016
Loading
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration.
Specifications
- A
- 8.000 (mm)
- Tol A
- +0.25/-0.25 (mm)
- F
- 0.640 (mm)
- Tol F
- +0.05/-0.05 (mm)
- H
- 1.200 (mm)
- Tol H
- +0.13/-0.13 (mm)
- L
- 16.000 (mm)
- Tol L
- +0.00/-0.80 (mm)
- P
- 1.780 (mm)
- Tol P
- +0.13/-0.13 (mm)
- Finish
- Passivated
- Head Diameter
- 8.000 (mm)
- Length
- 16.000 (mm)
- Material
- Austenitic Stainless Steel
- Thread Size
- M4 X 0.7-6g
- Threads
- ASME B 1.13M-2005
- Unit System
- Metric
Description
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration. There are no screw heads to protrude or spoil appearance or the product. With GW screws, the exterior surface is left virtually unmarred. The GW weld screw is an excellent choice for blind locations too, because it can be permanently pre-attached.
Item No. GWZ 04016
M4 X 16MM TO THE SURFACE WELD SCREW - 3 PROJS
Item No. GWZ 04016
Finish: Passivated | Net Weight: 0.0034
Loading
*Images are of plain finish items unless otherwise specified
Description
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration. There are no screw heads to protrude or spoil appearance or the product. With GW screws, the exterior surface is left virtually unmarred. The GW weld screw is an excellent choice for blind locations too, because it can be permanently pre-attached.
*3D models are nominal. As-formed features (radii, projections, lock marks, etc.) may vary. Please refer to the product drawing or spec sheet for exact dimensions.
Specifications
- A
- 8.000 (mm)
- Tol A
- +0.25/-0.25 (mm)
- F
- 0.640 (mm)
- Tol F
- +0.05/-0.05 (mm)
- H
- 1.200 (mm)
- Tol H
- +0.13/-0.13 (mm)
- L
- 16.000 (mm)
- Tol L
- +0.00/-0.80 (mm)
- P
- 1.780 (mm)
- Tol P
- +0.13/-0.13 (mm)
- Finish
- Passivated
- Head Diameter
- 8.000 (mm)
- Length
- 16.000 (mm)
- Material
- Austenitic Stainless Steel
- Thread Size
- M4 X 0.7-6g
- Threads
- ASME B 1.13M-2005
- Unit System
- Metric
​​​​​Looking for compliance information on this item? Visit our compliance portal for all related information here -> Compliance Portal