6-32 X 1/4" SURFACE WELD SCREW-3 PROJECTIONS
Item No. GW 1104
Loading
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration.
Description
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration. There are no screw heads to protrude or spoil appearance or the product. With GW screws, the exterior surface is left virtually unmarred. The GW weld screw is an excellent choice for blind locations too, because it can be permanently pre-attached.
Specifications
- A
- 0.250 (in)
- Tol A
- +0.010/-0.010 (in)
- F
- 0.020 (in)
- Tol F
- +0.002/-0.002 (in)
- H
- 0.041 (in)
- Tol H
- +0.005/-0.005 (in)
- L
- 0.250 (in)
- Tol L
- +0.00/-0.03 (in)
- P
- 0.050 (in)
- Tol P
- +0.005/-0.005 (in)
- Finish
- Plain
- Head Diameter
- 0.250 (in)
- Length
- 0.250 (in)
- Material
- C1010 High-Welding Quality, Low Carbon Steel
- Thread Size
- #6-32
- Threads
- Unified Standard Class 2A ASME B 1.1-2003
- Unit System
- Inch
Item No. GW 1104
Loading
* Images are of plain finish items unless otherwise specified
​​​​​Looking for compliance information on this item? Visit our compliance portal for all related information here -> Compliance Portal
Specifications
- A
- 0.250 (in)
- Tol A
- +0.010/-0.010 (in)
- F
- 0.020 (in)
- Tol F
- +0.002/-0.002 (in)
- H
- 0.041 (in)
- Tol H
- +0.005/-0.005 (in)
- L
- 0.250 (in)
- Tol L
- +0.00/-0.03 (in)
- P
- 0.050 (in)
- Tol P
- +0.005/-0.005 (in)
- Finish
- Plain
- Head Diameter
- 0.250 (in)
- Length
- 0.250 (in)
- Material
- C1010 High-Welding Quality, Low Carbon Steel
- Thread Size
- #6-32
- Threads
- Unified Standard Class 2A ASME B 1.1-2003
- Unit System
- Inch
6-32 X 1/4" SURFACE WELD SCREW-3 PROJECTIONS
Item No. GW 1104
Description
An OHIO GW weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GW screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration. There are no screw heads to protrude or spoil appearance or the product. With GW screws, the exterior surface is left virtually unmarred. The GW weld screw is an excellent choice for blind locations too, because it can be permanently pre-attached.