1/4-20 FLANGE WHIZ LOCK NUT - STAINLESS STEEL
Item No. BFWLFZ 1420
Loading
Serrated face hex lock nuts are easy to install because they spin on freely until they contact the surface they will lock against. The locking action is so effective that up to 30% more torque is needed to remove this part than is needed to install it. It can be used up to 15 times without any
Specifications
- A
- 0.437 (in)
- Tol A
- +0.000/-0.009 (in)
- B
- 0.250 (in)
- Tol B
- +0.005/-0.028 (in)
- C
- 0.563 (in)
- Tol C
- +0.046/-0.001 (in)
- Finish
- Passivated
- Flange Diameter
- 0.563 (in)
- Material
- Austenitic Stainless Steel
- Thickness
- 0.250 (in)
- Thread Size
- 1/4-20
- Threads
- Unified Standard Class 2B ASME B 1.1-2003
- Unit System
- Inch
- Width
- 0.438 (in)
Description
Serrated face hex lock nuts are easy to install because they spin on freely until they contact the surface they will lock against. The locking action is so effective that up to 30% more torque is needed to remove this part than is needed to install it. It can be used up to 15 times without any appreciable loss of locking effectiveness.
Item No. BFWLFZ 1420
1/4-20 FLANGE WHIZ LOCK NUT - STAINLESS STEEL
Item No. BFWLFZ 1420
Finish: Passivated | Net Weight: 0.0088
Loading
*Images are of plain finish items unless otherwise specified
Description
Serrated face hex lock nuts are easy to install because they spin on freely until they contact the surface they will lock against. The locking action is so effective that up to 30% more torque is needed to remove this part than is needed to install it. It can be used up to 15 times without any appreciable loss of locking effectiveness.
*3D models are nominal. As-formed features (radii, projections, lock marks, etc.) may vary. Please refer to the product drawing or spec sheet for exact dimensions.
Specifications
- A
- 0.437 (in)
- Tol A
- +0.000/-0.009 (in)
- B
- 0.250 (in)
- Tol B
- +0.005/-0.028 (in)
- C
- 0.563 (in)
- Tol C
- +0.046/-0.001 (in)
- Finish
- Passivated
- Flange Diameter
- 0.563 (in)
- Material
- Austenitic Stainless Steel
- Thickness
- 0.250 (in)
- Thread Size
- 1/4-20
- Threads
- Unified Standard Class 2B ASME B 1.1-2003
- Unit System
- Inch
- Width
- 0.438 (in)
​​​​​Looking for compliance information on this item? Visit our compliance portal for all related information here -> Compliance Portal